Your location:Home  Products   TBJ/LLJ300  LLJ300-Aluminum Continuous Extrusion Machine
LLJ300-Aluminum Continuous Extrusion Machine
LLJ300-Aluminum Continuous Extrusion Machine

LLJ300-Aluminum Continuous Extrusion Machine

LLJ300-Aluminum Continuous Extrusion Machine uses pure aluminum L0-L6 and aluminum alloy such as LD31,LF21 and so on. Advanced cleaning technology is adopted to ensure the cleanness of the stock rod. The stock wire is first given out from pay-off stand, then straightened and cleaning system, then sent to the continuous extrusion host machine for extruding. Wire product form after extruding,then pass through oxidation preventive equipment and cooling system, the last step is wrap-up or length fixed cutting after measured by meter counter and other equipment.
Product Detail

Main Technical Parameters

LLJ300

LLJ350

LLJ400

Extrusion wheel nominal diameter

300mm

350mm

400mm

Main motor power

90kW

180kW

250kW

Installed power

22.5 m/rpm

16m/rpm

4-12.5m/rpm

Extrusion machine speed

Pure aluminum, aluminum alloy

Pure aluminum, aluminum alloy

Pure aluminum, aluminum alloy

Types of materials

F9.5/12mm

F15mm

Ø20mm

rod diameter

5-150mm2

10-600mm2

200-1800 mm2

Product scope of section

Flat wire, flat tube maximum 30 mm wide, round bar, pipe diameter 20 mm

Flat wire, flat tube maximum 60 mm wide, round bar, pipe diameter 30 mm

Flat wire, flat tube maximum 170 mm wide, round bar, pipe diameter 80 mm

Product maximum width

Average productivity

230kg/h

450kg/h

500kg/h

Material overflow rate

0

0

1-3%


Application:

round tubes of air conditioner and refrigerator, multi-hole tubes for car air conditioner and intercooler, flat aluminum wire, producing pure aluminum L0-L6 and aluminum alloy such as LD31,LF21 and so on


Advantage:

advanced cleaning technology, High precision, advanced mold, low flash rate, New type lining device, convenient handling, Computer intelligent controlling system


LLJ300-Aluminum Continuous Extrusion Machine uses pure aluminum L0-L6 and aluminum alloy such as LD31,LF21 and so on. Advanced cleaning technology is adopted to ensure the cleanness of the stock rod. The stock wire is first given out from pay-off stand, then straightened and cleaning system, then sent to the continuous extrusion host machine for extruding. Wire product form after extruding,then pass through oxidation preventive equipment and cooling system, the last step is wrap-up or length fixed cutting after measured by meter counter and other equipment.


Aluminum Continuous Extrusion Machine, Find complete details about aluminum Continuous extrusion equipment from Changzhou Riyue Machinery Co. Ltd.. You may also find other aluminum extrusion machine products from our website!

Inquiry Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *
  
Other products
Hot products